Polyaspartic Floor Coating Services
Fast Installation | Durable Nonslip Results
Call today for a free quote at (904) 467-9436
What are the differences between Epoxy and Polyaspartic Floor Coatings?
Epoxy coatings: Tend to offer only two layers of protection over a surface. These perform well in heavy industry settings because they offer increased chemical resistance and good substrate protection, and are less permeable with greater hardness. Epoxy coatings also can tolerate exposure to many industrial chemicals. For instance, surfaces protected by epoxy coatings stand up well against sulfuric acid, which is used in a wide variety of industrial processes. However, certain organic acids present in food production, such as nitric acid, can harm epoxy coatings.
❝Top Notch Customer Service & Quality!❞
★★★★★ - "The Coat Goat is awesome!! They exhibited top notch customer service, quality, and speed of service. Not to mention they are a great value. I would highly recommend them to any of my friends and family."
Nick K.
Call for a Polyaspartic Floor Coating Quote
Financing Available
Locally Owned & Operated
Warranties on All Coats
Polyaspartic Floor Coatings by The Coat Goat Concrete Coatings LLC
Labor and Application of Polyaspartic Floor Coatings:
Polyaspartic technology eliminates a step in the coating process compared to epoxy and urethane combinations, saving labor and material costs and shortening project timelines. The esters can be manipulated to control drying time and extends the pot life (the time in a bucket it can be used before hardening too much), allowing assets to be put back to use more quickly. Polyaspartic coatings also can be formulated for application and curing at temperatures well below freezing.
Durability:
While relatively new on the industrial coatings scene this hybrid coating, similar to polyurethane, has become a much better choice when it comes to garage floors, businesses, and coating the interior/exteriors of all types of structures which is why The Coat Goat Concrete Coatings LLC uses this process. Polyaspartic Coatings are used to protect structures such as exterior concrete, barges, or tanks from harsh weather conditions because of their versatility and offer better impact resistance being 4x more durable than epoxy.
Flexibility:
Innovations in technology have made these coatings a more versatile option compared to epoxy and urethane coating systems. Polyaspartic formulations now have low adhesion values, and applying polyaspartic floor coating in a single coat accomplishes what traditional epoxy and urethane systems need two coats to do. These polyurethanes can be softer, offer better color and gloss retention, and are more flexible. Traditional epoxy coatings for garage floors can often take up to a month to fully cure, as opposed to a few hours for polyaspartic floor coatings, this can often be the deciding factor for application in a busy family home or business.
Why Should You Use The Coat Goat Concrete Coatings LLC?
Polyaspartic Floor Coatings are not generally considered a do-it-yourself installation and require a minimum of two people. Depending on the formulation, the average pot life of polyaspartic is only 20 to 30 minutes. The speed and accuracy required is daunting if you have never installed this type of coating before. Get the best results by choosing The Coat Goat Concrete Coatings LLC to install your polyaspartic floor coating.
Pros & Cons of The Coat Goat Concrete Coatings LLC Polyaspartic Floor Coatings vs Epoxy:
| Polyaspartic | Winner | Epoxy | |
|---|---|---|---|
| Air Quality | Low VOCS and virtually no off-gassing makes this product odorless | Polyaspartic | Off-gassing can decrease air quality so protective breathing gear is important |
| UV Stability | Wont fade or yellow even after extended exposure | Polyaspartic | Some products could fade or yellow after extended exposure |
| Drying Time | One hour or less per layer | Polyaspartic | Up to 16 hours of drying time per layer |
| Durability | Hard flexible finish is more durable and wont chip scratch or scuff | Polyaspartic | Hard durable finish but rigid texture is still vulnerable to abrasions |
| Cost | May be more expensive and may require extra installation costs | Epoxy | The more affordable solution |
| DIY | Can be applied with a squeegee or roller brush but quick drying time requires accuracy | Epoxy (Winner if Doing It Yourself) | Can be applied with a roller brush and longer drying time allows more flexibility |
| Non-slip | Smooth surface increases slipping risk so additives for non-slip are recommended | Epoxy | Not AS slippery as Polyaspartic but traction additives are still an option |
Frequently Asked Questions
What materials does The Coat Goat Concrete Coatings LLC use for coatings?
We use only high-end products—a polyurea base coat topped with a polyaspartic finish—to deliver unmatched beauty, industrial-strength protection, and long-lasting performance.
Who handles the installation?
Every project is installed by our highly trained, professional team. We follow strict quality and safety standards so your floor is built to last.
What makes your installation process special?
Our refined process combines professional-grade equipment with carefully tested application methods. From surface prep to final topcoat, we ensure a flawless, durable finish every time.
How does The Coat Goat Concrete Coatings LLC ensure great customer service?
Customer service is our foundation. You’ll get clear communication, personalized attention, and dedicated support before, during, and after installation.
What types of surfaces can you coat?
We specialize in concrete surfaces—garage floors, driveways, patios, and pool decks. If it’s concrete, we’ll make it the GOAT of all floors!
-Logo.wine.svg){kind=logo}
